How to fix Hp smart hard disk error solution?

Fix 1. Restart your computer To repair damaged system, you have to purchase the licensed version of Reimage. If you are experiencing SMART Hard Disk Error 301 for the first time, the first thing you should do is try to restart your computer. The error might be a false positive, so it is worth checking whether it occurs again after restarting your laptop. If that did not help, you could also try using a hard restart. Here's how:

• Completely turn off your computer

• Pull out the battery plug if it is connected to the socket

• Remove the batter fully

• Now, press the power button on your laptop and hold it for around 30 seconds

• Put the battery back in and try starting the device once again – see if the problem is solved.

Fix 2. Test hard disk from the BIOS To repair damaged system, you have to purchase the licensed version of Reimage. You can run a hard drive check within BIOS environment if you are unable to boot into Windows normally. Here's how:

• Restart your device

• When it begins booting, keep pressing F10 on your keyboard to access BIOS

• Use Right arrow on your keyboard to go to the Diagnostics tab

• Pick Primary Hard Drive Self Test and press Enter

• Let the test run – it may take awhile.

If the check detects problems, it further confirms that your hard drive is about to get corrupted. If no errors were found, proceed with the steps below.

Fix 3. Run check disk To repair damaged system, you have to purchase the licensed version of Reimage. Most people who do receive the SMART Hard Disk Error 301 error are able to access their normal Windows interface. If you also can, you should perform a check disk via Command Prompt – it can fix bad sectors and directory errors that could be causing the error in the first place.

• Type in cmd in Windows search

• Right-click on Command Prompt search result and select Run as administrator

• In the new window, copy and paste the following command, pressing Enter after: chkdsk C: /f /r /x

• The check will not run yet, so you have to in Y and press Enter

• Finally, restart your PC to start the check.

Fix 4. Check for file system errors To repair damaged system, you have to purchase the licensed version of Reimage.

• Press Win + E to open File explorer

• On the left side, click This PC

• Right-click on your main drive (C: by default) and select Properties

• Go to Tools tab

• Under Error checking click Check

• If User Account Control shows up, click Yes

• If the popup says you don't need to scan the drive, pick Scan drive

• Wait till the scan finishes and reports findings.

• 
  

Fix 5. Run an automatic repair tool To repair damaged system, you have to purchase the licensed version of Reimage. If you are not that familiar with Windows or troubleshooting is difficult, there are automatic solutions for your PC problems – Reimage. This repair tool can find and replace damaged Windows system files, remove malware, fix missing DLLs, registry errors, and much more. If you are suffering from multiple errors and frequent BSODs, this tool is right for you. Fix 6. Backup your data and replace your hard drive To repair damaged system, you have to purchase the licensed version of Reimage. If all the above steps did not help you fix SMART Hard Disk Error 301 error, you need to replace your hard drive. Since it is likely you are using a laptop, the process is quite a bit different than it would be on a PC. If you still have a warranty for your HP laptop, we strongly advise you to contact your local HP branch and explain the situation. It is likely that you will get full support and a replacement of the hard drive. Finally, before you do anything, make sure you backup all the personal files you hold on your computer, as hard drive corruption may cause a full data loss. For that, you can employ Data Recovery Pro.

Regards,

Rachel Gomez